9 Things Your Parents Taught You About Car Ignition Lock > 자유게시판

Why is My car ignition lock Ignition Locked?

There are many reasons your ignition might be stuck. The key might be dirty or may have a damaged wafer in it. You can fix it by sliding the key in and out of the cylinder several times.

The pins on the lock cylinder may also be stuck. You can tap the cylinder lightly using a small tack-hammer.

Check the Battery

If the car ignition switch is in Park or neutral but it doesn't turn on when the key is inserted into the ignition, it could be an issue with the transmission shifter switch. This can be fixed by moving the shifter up or down to get the car into the gear.

If it's still not turning, the problem could be related to the neutral safety switch or transmission shifter cable. They can be fixed by a mechanic, or an auto locksmith ignition replacement locksmith in your area.

The ignition cylinder may also wear out. Over time, the ignition and the key can wear out, which causes them to become difficult to insert or remove. A lubricant such as silicon lock lubricant can help solve this problem by allowing the wafers to slide into place.

Lint from your pocket and adhesive from tapes that hold packages together can build over the key, which prevents it from being able to slide into the ignition. To solve this problem you can try cleaning the key with the help of a cloth or a cleaner, such as Triflow. You could also try a spare key to determine if the issue is with the ignition key replacement or the key.

You could also tap the key with a small hammer, when it's in the ignition. This will cause a small vibration that could be enough to loosen the wafers inside the ignition and allow them to slide into place. However, you should be very careful not to harm the key or the ignition cylinder.

If none of the above work, you need to call a locksmith to check it out. The key might be broken within the cylinder for ignition or it could be time to replace it completely. A locksmith can make an alternate key if the problem is with the key. If the problem is related to the ignition cylinder, the vehicle will need to be brought to a repair shop to have it replaced. Fortunately, these issues are usually very easy to solve.

Check the steering wheel

A steering wheel that is locked may cause the ignition to stop turning. This happens if the driver is unable to engage it while exiting or enter the vehicle and is usually caused by yanking on the wheel and securing themself against it using their hands. It can also happen if someone in the rear seat is unable to stop the vehicle and engages the brakes when they get out of the vehicle.

Luckily, this is an easy fix that doesn't require a trip to a mechanic or a locksmith. First, ensure that the gear shift is in Neutral or Park. If it's not, gently push or pull the gear shifter until it shifts to one of these positions. You should also activate the handbrake or press the brake before turning the key.

If the wheel is not locked, a quick examination of the steering column will confirm that the key is connected to the lock cylinder. A small "Lock label can be found in the lower portion the ignition circle. It is easily removed by gently jiggling the key or pulling on it with moderate force. It is essential not to use too much pressure as it could damage the key or break a wafer in the lock cylinder.

Another option is to use an alternate key to see if it can disengage the lock. This could indicate that the original key has damaged and no more able to engage the wafers that make up the lock cylinder. If this is the situation then a professional at Karl Chevrolet Webster City will be able to design an alternative key.

If the key doesn't engage after spraying the penetrating lubricant it could help. Apply a small amount of penetrating oil to the ignition and keyhole. Then, jiggle the key or tap it lightly to get it working. If this doesn't work, you will probably need to visit a specialist at your local dealership for cars. They will be able to provide you with a replacement key and replace the ignition cylinder, in the event that it is required.

Check the Key

It is possible that your key is damaged if it does a new ignition switch require a new key not turn on. You can clean any foreign material (lint from packing tape or adhesive) from the key. You may also try rubbing alcohol on the key or Goo Gone to see if it aids.

It could be that the internal lock pins are not moving properly when you insert the key. You can test the spare key by gently sliding it out of the ignition after having insert it. This should let you be able to feel and hear if internal lock pins move, as they ought to. If not, you could lubricate the pins with graphite powder. You can purchase graphite in small tubes that can be put directly into the keyhole. This will help the pins slide into place as you insert the key and stop them from getting stuck.

It is possible that your key has become damaged or worn out and isn't able to work with the pins in the ignition cylinder. This can cause the cylinder of ignition to not to turn, preventing you from starting your vehicle. If this is the case, you will need to take your vehicle to repair or locksmith shop for service.

If you are able to turn your car ignition lock on with an extra key, and you've ruled out any problems with the steering wheel or battery, it is possible that the ignition cylinder has been worn out. Try to open the lock by using a blunt screwdriver or a handle of smaller hammers. Don't use the head. A gentle tap on the cylinder can often release it and allow you to turn your key and start your car. If this does nothing, you'll need to have your lock's cylinder replaced by a mechanic.

Check the Ignition Socket

The ignition socket is where your key is inserted and slides out of place when you insert it. Often times, it gets filled with debris or is due to wear and tear. Try putting some silicon lock lubricant (like WD-40) into the ignition to help things move along.

You can also employ a small hammer and gently tap the inside of the ignition cylinder, to try to loosen or reset the pins which may be out of alignment. Be very cautious not to overdo this or you could cause serious damage to the ignition switch.

Before you attempt this, ensure that your car's gearbox is either in park or neutral. A majority of modern cars have an electronic system that locks the steering wheel if it is not in neutral or park. This will stop the ignition key from being turned.

If you've tried these steps and your key doesn't turn, it's possible that the ignition housing needs to be replaced. It is important to note that different vehicles require different procedures when replacing the ignition cylinder.

Generally, this means taking off the plastic cover that is over the steering column and ignition assembly. To remove it, you'll have to adjust the tilt-wheel in its lowest position. Then unscrew any fasteners that are holding it in place.

Once the cover is removed, you'll have to take the old ignition cylinder out of the steering column. Then, you will need to check the new ignition cylinder you purchased with the one you removed to make sure that they are identical. After this step is completed, the new ignition cylinder can be installed in the same manner that the old one was removed.

It is possible that, despite our best efforts, an ignition may become damaged and require to be replaced. It is recommended that when this happens, you contact an Tempe Locksmith. A locksmith can help you select the proper replacement and then install it correctly to ensure that your vehicle can start again.