A Relevant Rant About Car Ignition Lock > 자유게시판

Why is My Car Ignition Locked?

There are many reasons why your car ignition may be locked. One reason is that the key is dirty or has a broken wafer inside. It is possible to fix this by sliding the key into and out of the cylinder several times.

The pins of the lock cylinder may also be stuck. You can make use of a small tack hammer to gently tap the cylinder to loosen the pins.

Check the Battery

If your car is in Park or neutral, but doesn't come on when you insert the key into the ignition, it might be a problem with the shifter switch on the transmission. This can be easily fixed by moving the shifter up or down to get the car in the gear.

If the car still won't turn, the problem could be with the neutral safety cable, or the shifter on the transmission. They can be fixed by a mechanic or by an auto locksmith in your area.

The ignition cylinder may also be worn out. In time the van ignition repair as well as the key may wear out and become difficult to insert or remove. A lubricant, such as silicon lock grease could solve this issue, letting the wafers to slide into the proper position.

The key could get clogged by lint from your pockets and adhesive from tape that is used to keep packages in place. This can prevent the key from sliding into the ignition. To fix this issue try cleaning the key using the help of a cloth or a cleaner, like Triflow. You should also utilize a spare key in order to see if the problem is with the key or the ignition.

You can also try to tap the key with a small hammer, when it's in the ignition. This can cause a small vibration that could cause enough friction to loosen the wafers within the ignition and allow them to slide into place. However, you should be cautious not to scratch the key or the ignition cylinder.

If none of the above work, you should consult a locksmith for help in figuring it out. The key may be damaged inside the ignition cylinder, or it might be time to replace it altogether. A locksmith can make a replacement key in the event that the issue is the key. If the ignition cylinder is the problem, you will need to bring the car to a repair shop in order for it to be repaired. Luckily, these problems are typically very simple to repair.

Check the steering wheel

A simple problem that can stop the ignition from turning is a locked steering wheel. This happens if the driver has a mistake and engages it while exiting or enter the vehicle and is usually caused by yanking on the wheel while balancing themselves against it with their hands. It could also happen if a passenger in the back seat is unable to stop it when they climb out of the car.

Fortunately it's an easy fix that doesn't require a trip a mechanic or a locksmith. First, ensure that the gear shift is in Neutral or Park. If it isn't, simply push or pull the shifter gently until it moves into one of these positions. You should also activate the handbrake or press the brake prior to turning the key.

If the wheel isn't locked taking a look at the steering column will tell if the key has been engaged with the lock. This is typically identified by a small "Lock" label on the lower part of the ignition circle. It is possible to disengage this by gently jiggling or pulling the key with moderate force. It is important not to use too much force as this could damage the key or even break off a wafer inside the lock cylinder.

A spare key can also be used to unengage the lock. This may indicate that the original key has worn out and no capable of engaging the wafers that make up the lock cylinder. If this is the case then a professional at Karl Chevrolet Webster City will be able to make a replacement key.

If the new key still won't engage, a quick spray of penetrating oil can help. Just apply a small amount of oil around the ignition and the keyhole that you have inserted, and then jiggle or tap it lightly until it starts to engage. If this doesn't work you, it's possible to consult a specialist in your local car ignition switch dealership. They will be able to provide you with a new key and replace the ignition cylinder if needed.

Check the Key

If you're unable to get your key to turn in the ignition, it's possible that there is a problem with your key. You can remove any foreign material (lint from packing tape or adhesive) from the key. You can also try rubbing alcohol or Goo Gone on the key to see if it can help.

If the pins in the lock do not move in a proper manner when you insert your key, it's possible that they are stuck. You can test an extra key by gently sliding it out of the ignition once you have insert it. You should be able to hear and feel the pins move inside. If you don't feel any movement, you could lubricate them with graphite powder. You can buy graphite in small tubes that can be squirted into the keyhole. This should allow the pins to slide into position when you insert the key and also prevent them from getting stuck.

It could be that your key has become damaged or worn out and is unable to engage with the pins within the ignition cylinder. This could cause the ignition cylinder to not turn, which will prevent you from starting your vehicle. In this case, you'll need to bring your car to an auto ignition key replacement repair shop or locksmith to get service.

If you're able to turn the car with a spare key and you've ruled out issues with the steering wheel or battery, it could be that the ignition cylinder has worn out. You can attempt to loosen the lock cylinder by using the blunt end of a screwdriver, or the handle of the hammer (not the head). Gently tapping on the cylinder can often release it and allow you to turn your key and start your vehicle. If this does nothing then you'll need the lock cylinder replaced by an expert mechanic.

Check the Ignition Socket

The ignition socket is the place your key slides into and out of position when it is inserted. It can get clogged up with dust, or simply wear and tear. You can spray some silicon lock lubricant into the ignition.

You can also employ a small hammer and gently tap the inside of the cylinder for ignition, to try to loosen or reset the pins that may be out of alignment. Be very cautious not to overdo it or you could cause major damage to the ignition switch.

It is important to check whether your car's transmission is set to park or neutral prior to attempting this. Many newer cars have an option to lock the steering wheel when it is not in neutral or park and prevent the key from being turned in the ignition.

If you have tried all of these methods and your key still won't turn, it's possible that the ignition housing needs to be replaced. Different vehicles have different methods for replacing the ignition cylinder, therefore it is essential to follow the correct procedure.

This usually involves removing the plastic cover that covers the steering column and the ignition assembly. To remove this, you will need to first adjust the tilt-wheel to the lowest setting and then remove any fasteners holding it in place.

After removing the cover, you'll need to remove the old ignition cylinder from the steering column. Then, you'll have to check the new ignition cylinder you purchased with the one you removed to ensure that they're identical. After this step is completed, the new ignition cylinder will be installed in the same way that the previous one was removed.

Sometimes, despite our efforts, the ignition will be damaged and require replacement. It is recommended that when this happens, you call a Tempe Locksmith. A locksmith can help you select the proper replacement and then install it correctly to ensure that your vehicle can start again.